Porsche Cayenne Drive Shaft installation Instructions
Replace your failure prone factory Porsche Cayenne Drive Shaft with one of our updated, warranted & dynamically balanced upgraded Drive Shafts.
STEP BY STEP INSTRUCTIONS ON HOW TO CHANGE YOUR CAYENNE DRIVE SHAFT
If you have any further question on how to install you Cayenne Drive Shaft, please call us at 1 (305) 503-9921 or e-mail us firstname.lastname@example.org and one of our drive shaft specialists will assist you.
TOOLS REQUIRED TO REPLACE YOUR CAYENNE DRIVE SHAFT
- 12mm triple square socket
- 18mm socket
- 13mm socket
- Drive Socket
- 1/2 Inch Extension
- 6 Inch Extension
Step 1: With your 12mm remove the 6 bolts on the back of the drive shaft.
Step 2: Remove the 3 18mm nuts and bolts from the front of the drive shaft.
Step 3: Remove the 3 18mm bolts on the Flex Disc.
Step 4: Remove the 13mm bolts on the plate that cover the center support bearing.
Step 5: Support the exhaust and loosen all exhaust clamps.
Step 6: Remove the center, passenger, and lastly the drive's side exhaust hanger bolts.
Step 7: Pull drive shaft forward to separate the drive shaft from the differential.
Step 8: Remove the drive shaft.